WМ233-1 Addressable Input-Output Device

WМ233-1B Addressable Input-Output Device (Module)

WМ233-1D Addressable Input-Output Device

WМ233-1 Addressable Input-Output Device (printed board)

The WM233-1 Addressable Input-Output Device has 3 monitored inputs, 3 voltage free changeover relay output rated at 1А/DC30V, a built-in short circuit isolator.
The WM233-1 Addressable I/O Device is designed to transfer input state signals to the FACP and to interface with control equipment such as door contacts, sprinkler flow switches, fire fans, etc

Available in models:

WM233-1 - as a printed board to fit in a housing
WM233-1B - in wall-mount housing
WM233-1D - in 35 mm DIN rail mount housing

Features
Technical Data
Downloads
Certificate (CoC)

- 3 monitored input, 3 voltage free changeover non-monitored relay outputs
- address range 1 – 125
- input/output address and mode settings using P-01 device programmer
- built-in short-circuit isolator
- input, output and SCI status indication
- loop powered
- mounting type models

Operating Voltage	17… 28 V DC
Quiescent current	≤ 0,25 mA
One LED current consumption	≤ 0,63 mA
All LEDs current consumption (without isolator LED)	≤ 3,8 mA
Output relay contact rating	1 А at DC30V
SCI: maximum series resistance – switch closed	≤ 0,13 Ω
Isolator data	Refer to the WM100-2B Short-Circuit Isolator datasheet
Dimensions, mm:
– WM233-1	103 х 75
– WM233-1B	150 х 94 х 23
– WM233-1D	129 х 94 х 34
Weight	≤ 150 g
Housing IP rating	IP30 (for B and D models)
Operating temperature	-10 ºС to +55 ºС
Humidity	up to 95 % (non-condensing)
Average service life	10 years