WМ244-1 Addressable Input-Output Device

WМ244-1B Addressable Input-Output Device (in plastic housing)

WM244-1 Addressable Input-Output Device (printed board)

WM244-1D addressable input-output device (I/O module)

WМ244-1B Addressable Input-Output Device (in plastic housing)

WM244-1 Addressable Input-Output Device (printed board)

WM244-1D addressable input-output device (I/O module)

The WM244-1 addressable input-output device has 4 inputs, 4 voltage free changeover relay outputs rated at 1А/DC30V and a built-in short circuit isolator.

Available in models:

WM244-1-as a printed board to fit in a housing
WM244-1B -in wall-mount housing
WM244-1D -in 35 mm DIN rail mount housing

Features
Technical Data
Downloads
Certificate (CoC)

- 4 isolated monitored inputs, 4 dry contact relay output 1A at DC30V
- address range 1 – 125
- address and input/output mode settings via P-01 device programmer
- built-in short-circuit isolator
- input, output and SCI status indicators
- loop powered
- mounting type versions

Operating Voltage	17… 28 V DC
Protocol voltage	5… 9 V
Quiescent current	≤ 250 μA
One LED current consumption	≤ 630 μA
All LEDs current consumption (without isolator LED)	≤ 5 mA
Output relay contact rating	1 А at DC30V
SCI: maximum series resistance – switch closed	≤ 0,13 Ω
Isolator data	Refer to the WM100-2B Short-Circuit Isolator datasheet
Dimensions, mm:
– WM244-1	103 х 75
– WM244-1B	150 х 94 х 23
– WM244-1D	129 х 94 х 34
Weight	≤ 150 g
Housing IP rating	IP30 (for B and D models)
Operating temperature	-10 ºС to +55 ºС
Humidity	up to 95 % (non-condensing)
Average service life	10 years

Login or register to get access to full datasheets
WМ244-1 Addressable Input-Output Device (brief) (227.33 KB)